User Manual
Universal Plug and Play
Universal plug and play (UPnP), NAT, and firewall traversal allow traffic to pass through
the router for applications using the UPnP protocol. This feature requires one active WAN
connection. In addition, the computer should support this feature. In the presence of
multiple WAN connections, select a connection on which the incoming traffic is present,
for example, the default WAN connection.
UPnP
To configure UPnP:
1. Select Advanced.
2. Select Application > Enable UPnP.
3. Select the WAN Connection and LAN Connection that will use UPnP from the drop-
down lists.
4. Click Apply to temporarily apply the settings.
5. To make changes permanent, click Save Settings.
Page 66
of 118
