2
Modem Card Easy Start
About this
Easy Start
This booklet contains information on setting up the ADSL
modem card
DSL300P.
It touches on the key installation
procedures to help you setup your modem in a breeze!
Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.
Installation Notes
•
The graphics and screens illustrations shown in this easy start may differ from
what you see from your system, but the steps still apply.
•
A Philips Screwdriver is required for the card installation.
•
The documentation for your computer should come in handy during the card
installation. Have it ready by your side.
•
It is recommended that any existing modem card be removed before installing your
new modem card.
Safety Precaution
•
Do not remove your card from its protective bag until you are ready to install it.
•
Always try to hold your card by its edges. Avoid touching any electronic components
on your card.
•
Static electricity can cause permanent damage to your card. To prevent such a
damage, you must ground yourself while installing the card:
»
Use a grounding strap, which is a coiled wire with a clip at one end and an
elastic strap at the other. Wear the strap around your wrist and attach the
clip to any non-painted metal surface of the computers chassis. OR
»
If you do not have a grounding strap, touch any non-painted surface of the
computers chassis before you begin installation, and again every minute or
so until the installation is completed.