Aztech DieMaster DM-40 series, Руководство пользователя

Страница: 16 / 56

AZTECH CONVERTING SYSTEMS
DM-40XX
USER MANUAL
14 Rev 1.3
3-2: Web Guide Setup
The web guide is located in the center of
the machine between the unwind and re-
wind stations. After webbing the machine,
set the web by doing the following:
Setting the Web Guide:
1. Press the “SERVO-CENTER” button on the
front of the web guide.
2. Align the sensor with the inside edge of the
web. For fine alignment adjustment, turn
knob on outside of web guide.
3. Jog the machine briefly to assure that the
web is moving smoothly.
4. Press the “AUTOMATIC” button which
will engage the sensor and allow the web
guide to adjust itself to the movement of
the web.
5. For more specific instructions about the
features of the web guide, refer to the Ac-
cu-Web manual included with this manual.
COARSE
SENSOR
POSITIONING
FINE
SENSOR
POSITIONING
3-3: Nip Roll Operation
The Nip Roll is pneumatically controlled using control switch and
must be in the up position while machine is running, and in the
down position when threading machine.
AUTOMATIC SERVO CENTER