Aztech DieMaster DM-40 series, Руководство пользователя

Страница: 27 / 56

AZTECH CONVERTING SYSTEMS
DM-40XX
USER MANUAL
25
The Torque Compensation feature mimics the act of slowly increasing rewind torque by gradually
turning up the knob while the roll grows. To set up the feature, enter the core diameter as the Start-
ing Diameter. Enter the finished roll size as the Finishing Diameter. Subtract the torque setting
used to start the roll from the setting used to finish the roll and enter this as the % to ADD. When
the TQ COMP is on, a text will be displayed above the rewind torque bar.
Press the box to change between
Over and Underwind.
DO NOT SWITCH WHILE RUNNING
TORQUE COMPENSATION