Step 5:
Carefully layout the tent top over the frame and use the buckles on the under-
side of the top to attach to the frame. Secure the two buckles closest to the cor-
ner fitting first then tighten the remainder of the buckles. You may want to lay
out a ground cloth at this time to prevent damage to the tent top when it
touches the ground.
**Dragging the top fabric on the ground, or pulling hard over frame parts can
damage, tear, and scratch the fabric. Be careful with your fabric.
Step 6:
Lift up one side of the tent off the ground and slide two of the leg pipes over
the corner fitting and pin into place.
Step 7:
Lift up the other side of the tent and install and pin the leg pipes on the other
two corner fittings.
Step 8:
Anchor the tent with the included stakes and ropes. The ropes should be tied
around each of the perimeter fittings with an overhand slip knot. The stakes
should be driven approximately six (6) feet away from the bottom of the leg. To
achieve proper rope tension, drive each stake approximately 24” into the ground
with a sledge hammer. Tie the rope to the stake with a clove hitch and continue
driving the stake into the ground until the rope is taught.
WARNING: The safe installation and use of commercial tenting products can vary from site to site and during varying climactic condi-
tions. Careful consideration should be paid to any installation during windy conditions. Techniques other than those specified above may
be required during these types of conditions.
Soil conditions also vary from site to site. The included anchoring package for this tent may need to be supplemented with alternate
anchoring during windy conditions and in areas with questionable soil holding power. Full product engineering is available, but not
included, by the manufacturer including structural engineering and site specific soil engineering.
Questions pertaining to the proper procedure for the installation of this and any tent product manufactured by Aztec Tents & Events
should be directed to our design staff at (800) 228-3687.
490 Alaska Avenue Torrance, California 90503 Toll Free (800) 228-3687 Fax (310) 381-0722 www.aztectent.com
Содержание Traditional Frame Tent
