Aztec Tents Traditional Frame Tent, Инструкция по установке

Страница: 21 / 36

Step 10:
For 1pc Tops skip to step 12. For expandable tops the multiple sections of the
tent top fabric are joined with either a clasp or lace system and a velcro storm
flap. The photo to the right shows the clasp style connection before the storm
flap has been secured.
Step 11:
The photo to the right shows the lace style connection before the storm flap
has been secured.
Step 12:
Now secure the tent top to the perimeter frame. Tighten the two buckles clos-
est to the corner fitting first then tighten the remainder of the buckles.
Step 13:
Lift up one side of the tent off the ground and slide two of the leg pipes over
the corner fitting and pin into place. Tent Jacks (optional accessory) are shown
to aid in the lifting of the frame. Either using tent jacks, man power, or another
lifting device the frame needs to be supported at every leg when lifting to pre-
vent undue stress on frame members.
Step 14:
Lift up the other side of the tent and install and pin the leg pipes on the other
two corner fittings and middle legs.
490 Alaska Avenue Torrance, California 90503 Toll Free (800) 228-3687 Fax (310) 381-0722 www.aztectent.com