User Manual/Manuel de l’Usager
- 15 -
Select the option according to the option editing
mode (A or B to decide and D to validate)
222 FORCED SALE
This places the machine in mandatory sale,
meaning that once credit has been introduced, it
is mandatory to make a purchase in order to get
money back (only with the MDB system).
Select the option according to the option editing
mode (A or B to decide and D to confirm) in order to
program mandatory sale.
223 MAX. CREDIT
Program the maximum amount admissible with
a MDB/ICP coin mechanism installed
According to the numerical editing mode, introduce
the amount of maximum credit that the machine will
accept.
228 AGE TOKEN
Programmes the activation of the use of the MINOR
TOKEN for access control.
It is possible to activate the access control for
minors on the machines by programming the use of
the MINOR TOKEN.
To deactivate the function, press D.
If the token is programmed, when a coin is inserted
the message INTRODUCE TOKEN will appear.
When the token has been introduced, a credit
message with zero CREDIT will appear on the
screen, as it waits to receive coin, note or card
credit.
If the token is not programmed, the machine works
as usual and the token is rejected.
229 CARD TEST
Tests the card reader by making sales which do
not enter accounts.
Press D to start the test and make a number of purchases
with the card.
PROGRAMMING SELECTIONS
301 FAM/PRO.CODE
Program the family and products codes
Program the family and product codes for each
selection. This function allows to assign, using the
numerical editing, two numbers from 0-99 to each
selection to facilitate computer treatment of the
accounting data.
302 GROUP/SELEC.
Allows selections to be associated so they
alternate to make unloading even.
Via this function, selections are associated so that
they serve the product consecutively when any of
the associated selections is pressed.
5 groups can be established and up to 10 selections
can be assigned to each group.
Press A to select the group to which the selection is
to be assigned.
Press D to start associating selections. If the
selection chosen already has other selections
associated to it, then this association is displayed.
Press the desired selection. If it is already
associated, then the association is deleted.
This function is not active (although programmed) if
your machine does not have product exit detection
(iDetect) or detection is deactivated or faulty.
303 PROMOTIONS
Program a selection so that, once sold, it gives a
product from other channels. Maximum of two
channels per selection.
Press the selection that you want to program, the
screen will indicate the selections that are
associated successively. If there are no associated
channels, the screen will indicate NO Column. To
ASSOCIATE a canal to the chosen selection,
program as indicated below:
Use the A or B keys of the programming keyboard
and the character on the left will go forwards or
backwards respectively. Press D to validate and
proceed to program the other character. Once the
derived channel is programmed, press D and this
association will be registered.
If the character on the right is programmed and you
press C, this will validate the value and will go on to
program the character on the left.
To LIBERATE an associated channel, you should
proceed in the same way as in programming, that is,
if you associate a channel that is already associated
to a selection, you will free it.
To edit the channels of other selections, press the
key of this selection.
306 ERASE GROUP
Eliminate all selection associations.
Press A or B to select ON or OFF. Press D to
validate the choice.
If you choose OFF, you exit the function
Содержание PALMA H-70
Страница 2: ...User Manual Manuel de l Usager 2...
