Azden IR-CSX, Инструкция по эксплуатации

Страница: 7 / 16

C. Pager Interrupt Feature

When the Pager Interrupt feature is ac vated, the pager signals will override all other sig-
nals.

In order to ac vate the Pager Interrupt feature, connect the pager wires to the Pager Con-
nectors and turn the Select Switch to 100V/70V (for high impedance output) or 20V (for
low impedance output).
 Use the Pager Volume Control Knob to adjust the pager volume.
Pager Connectors
Select Switch
External Sensor Connector
Pager Volume Control

When the pager signal is received
while the unit is on, all 3 channels
will be immediately muted and only
the pager signals will be output.
A er the pager signals stopped, the
3 channels will automa cally be re-
instated in a few seconds.

When the pager signals are received
when the unit is in standby, the unit
will automa cally be turned on and
the pager signals will be output.
D. PREOUT & RECOUT
 PREOUT is an output RCA jack for an external ampli fi er, etc. The output volume level will
not be controlled by the Remote.
 RECOUT is an output RCA jack for an external recorder, etc. The output volume level will
not be controlled by the Remote.
E. Notes

The opera ng range of the Receiver and Transmi ers is approximately 45 (15 m). The
opera ng range is subject to the environment. Select an installa on loca on to a ff ord the
least amount of obstacles to ensure the best possible range.
7