IRR
‐
50P
RECEIVER
A.
Turning
It
On
When
the
unit
is
plugged
into
power
source,
the
LED
indicator
in
the
middle
of
the
emi er
dome
will
light
in
RED.
This
indicates
that
the
unit
is
now
in
the
standby
mode.
Note
that
the
unit
will
not
accept
commands
from
the
Remote
for
the
fi
rst
7
seconds
since
it
is
plugged
in.
LED
Indicator
RED:
Standby
GREEN:
Power
on
GREEN
BLINKING:
Receiving
command
from
Remote
Turn
the
power
on
by
pressing
the
Power
Switch
on
the
Remote
Control
and
the
LED
indicator
on
the
dome
will
turn
to
GREEN
and
the
unit
is
ready
to
receive
signals
from
the
Transmi ers.
The
LED
indicator
will
turn
to
RED
when
you
turn
the
power
o
ff
by
using
the
Remote.
The
unit
is
now
in
the
Standby
mode.
B.
Remote
Control
Remove
the
ba ery
compartment
door
by
slid-
ing
it
towards
the
arrow
on
the
cover
and
insert
2
AAA
alkaline
ba eries
following
the
polarity
marked
inside
the
compartment.
Use
the
Power
Switch
to
turn
the
unit
on
and
o
ff
and
the
appropriate
volume
bu ons
to
change
the
volume
of
the
respec ve
channels.
The
Volume
Control
on
the
IRN-20
Microphone/
Transmi er
can
also
be
used.
Note
that
this
control
will
only
change
the
master
volume.
WARNING
:
Remove
the
ba eries
when
the
Remote
will
not
be
used
for
a
prolonged
period.
Power
Switch
Ba ery
Compartment
Vol
u
me
Control
Bu
ons
6
