Azbil SLPC1F, Руководство пользователя

Страница: 54 / 86

5-8
Chapter 5. Adjusting PID Values
When the slider’s range is changed, its minimum movement (the value of one slider
step of increase or decrease) also changes automatically as shown in the table below.
• Proportional band (P)
Setting range 0.1–100.0 0.1–200.0 0.1–500.0 0.1–999.9
Minimum movement 0.5 1.0 5.0 10.0
• Integral time (I) / derivative time (D) (when control parameters have no
decimal point)
Setting range 0–100 0–200 0–500 0–1000
Minimum movement 1 1 5 5
Setting range 0–2000 0–5000 0–9999
Minimum movement 10 25 50
•
Integral time (I) / derivative time (D) (when control parameters have a decimal
point)
Setting range 0.0–100.0 0.0–200.0 0.0–500.0 0.0–999.9
Minimum movement 0.5 1.0 5.0 10.0
z
Parameter tabs
On the parameter tabs, PID values and various other parameters can be set.
•
[Control] tab
Parameters related to control, including PID values and set points, can be
specified. Set points and default process variables can also be set on a simulation
graph. PID values can also be set with the PID sliders.