Azbil SLPC1F, Руководство пользователя

Страница: 49 / 86

5-3
Chapter 5. Adjusting PID Values
z
Load a model from a model file (*.spm3)
The PID Simulator reads an existing model file.
This is the same as selecting [File]
→
[Load Model from Model File] from the
menu.
z
Make a model from trend data
The PID Simulator reads data directly from the Trend Monitor without a data file
and starts the Modeling Wizard. Selection of this item is enabled only when the PID
Simulator was started from the Trend Monitor after sampling data.
Note
• A data file consists of device operating data that was sampled by the Trend
Monitor and saved in the PID Simulator’s proprietary format. 5 - 3 Data
Sampling Method (p. 5-21)
(for details)
• A model file contains mathematical models created from the data file and
parameters used when the PID Simulator runs simulations.
z
PID Simulator screen (when executing a PID control simulation)
PID sliders Parameter tabs
Menu bar
Toolbar
Simulation graph