29
Chapter 5. APPLICATION OPERATION
5 - 1
Function Setup
Setting operation
Follow the procedure below to set functions such as alarm detection and event output
assignments.
(1) Press the
key to display the instantaneous flow rate.
The m
3
/h indicator lights.
(2) Hold the
and
keys down simultaneously for 3
seconds.
Item No. C-01 is displayed on the 7-segment display, and the
mode changes to function setup mode.
(3) Press the
or
key to select the desired setup item, and
press the
key.
The current setting blinks on the 7-segment display.
(4) Press the
or
key to select the desired setting.
(5) When the desired setting has been selected, press the
key
to finalize the setting.
After approx. one second, the item number is redisplayed, and
the setting is updated.
(6) If there are other required setup items, return to step (3) above to
repeat the procedure. If there are no other setup items, proceed
to step (7).
(7) Press the
key.
The display changes from the function setup mode to the instan-
taneous flow rate display.
Handling Precautions
•
If you do nothing for one minute after entering the function setup
mode, the display automatically returns to the instantaneous flow
rate display.
•
If you press the
key without pressing the
key after car-
rying out the operation in step (4), the setting remains at the pre-
vious value without being updated.
