Ayrton Khamsin, Руководство пользователя

Страница: 10 / 20

USER MANUAL _
10
KHAMSIN CONTROL PANEL MENU – OPTION DETAILS
The following section provides details on the options that can be selected
through the control panel menu. Refer to the table above.
Note: You can exit this menu at any time by pressing “Mode Esc” repeatedly
until you return to the home screen.
ADDRESS
SET DMX ADDR
Allows you to change a DMX address from the fixture’s control panel.
w Double click jog wheel to access main menu.
w The display will show “ADDRESS”.
w Double click to access the menu “Set DMX Address”.
w Turn the jog wheel clockwise and set the DMX address “A001~AXXX”.
w Double click to confirm
w Long click the jog wheel to exit the menu – “Set DMX Address” then
back to main menu by long click again.
MODE
USERS MODE
With this function, you can choose between different DMX modes.
w
Double click jog wheel to access main menu
w
Turn the jog wheel clockwise to display“USERS MODE”.
w
Double click to edit.
w
Turn the jog wheel clockwise to display “User mode” Double click to
edit.
w
Choose “Stand Mode” “Basic mode” “Extended mode” , “User Mode A”
“User Mode B” and “User Mode C”.
w
Double click to confirm
w
Long click to exit –“User Mode” then back to main menu by long
click again.
EDIT USER A, B, OR C
With this function you can adjust the channel order.
w
Double click jog wheel to access “USERS MODE” menu
w
Turn the jog wheel until display“Edit User”.
w
Double click to access “Edit User” menu.
w
Set up “Max Channel=xxx” and select channel value.
w
Set up “Mode B” and “Mode C” by the same way.
w
Long click to exit – “Edit User” then back to main menu by long click
again.
OPTIONS
STATUS
No DMX Mode
Defines the fixture’s state when there is no command signal from the DMX
controller. The fixture can either launch a program automatically, close the
shutter, or even remain in the state when the last DMX values (Hold) were
received. The default setting is “Hold.”
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status” menu The display will show “No DMX
Status”.
w Double click to access “No DMX Status” The display will show “Hold”
Turn the jog wheel to select “Close”.
w Double click to confirm
w Long click to exit the menu –“Status” then back to main menu by long
click again.
Pan Reverse
Reverses the PAN movement.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise to display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status” menu display will show “Pan Reverse”.
w Double click to access “Pan Reverse”, display will show “OFF” turn the
jog wheel to select “ON”.
w Double click to confirm
w Long click the jog wheel to exit menu –“Status” then back to main
menu by long click again.
Tilt Reverse
Reverses the direction of the TILT movement.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise to display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access to access “Status” menudisplay will show “Tilt
Reverse”.
w Double click to access “Tilt Reverse” The display will show “OFF” Turn
the jog wheel to select “ON”.
w Double click to confirm
w Long click the jog wheel to exit menu –“Status” then back to main
menu by long click again
Pan Degree
Adjusts the amplitude of the PAN movement at 630° or 540°.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display“Options”.
w Double click to access“Options” turn the jog wheel to select “Status”.
w Double click to access “Status”menu The display will show “Pan
Degree”.
w Double click to access to access“Pan Degree” The display will show
“540” Turn the jog wheel to select “630”.
w Double click to confirm
w Long click the jog wheel to exit menu –“Status” then back to main
menu by long click again.
Feedback
Readjusts the PAN and TILT positions automatically in the event of
accidental shifting due to a physical shock.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status” menu The display will show “Feedback”.
w Double click to access “Feedback” The display will show “ON” Turn the
jog wheel to select “OFF” to deactivate feedback.
w Double click to confirm
w Long click the jog wheel to exit menu –“Status” then back to main
menu by long click again.
Pan/Tilt Spd
You can choose between four movement speeds, from “Speed 1” to
“Speed 4.” The “Speed 1” setting is the fastest.
w Double click jog wheel to access main menu.
w Turn the jog wheel clockwise then display “Options”.
w Double click to access “Options” turn the jog wheel to select “Status”.
w Double click to access “Status” menu The display will show “Pan/Tilt
Spd”.