Ayre V-1x, Руководство пользователя

Страница: 9 / 16

In Case of
Trouble
Should the Ayre V-1x amplifier ever fail to operate, please
check the following:
Is the unit in the “Operate”
mode?
The rear switch is the master power switch, and is normally
intended to be left on. The front switch is the
Standby/Operate switch. To operate the amplifier, the front
panel indicator must be glowing blue.
Are all of the connections to
the amplifier secure?
Check to see that the input and speaker connections on the
rear of the V-1x are in place. Also, be sure that the amplifier
is connected to a working AC outlet.
Is the AC circuit breaker OK? The power switch on the rear of the unit incorporates an AC
circuit breaker. In the case of an overload, the circuit
breaker automatically sets the switch to the “off” position.
To reset it, press the switch to the “on” position.
If the circuit breaker immediately resets itself to the “off”
position, do not attempt further repairs. There are no
user-serviceable parts in the Ayre V-1x. If the amplifier still
does not operate, bring the unit to your dealer for assistance.
Do not remove the amplifier cover. Hazardous
voltages may exist inside the unit.
!
Page 7