Try to operate the laser after these steps. When successful, the laser will follow the selected commands on
your remote control.
- Laser diodes are very temperature sensitive. It is therefore possible that a lack of output or any flickering is
noticeable when using the laser in cold environments. Give the laser a warm-up time between 5 and 15
minutes, after this the beam output should be steady and on full power.
Differences:
ITA Galaxa:
Dual lens output, one for each laser colour. Grating effect for both lenses.
ITA Gobo Star:
Single lens, several figures with grating effect.
ITA Shine Star:
Dual lens output, with one green cross rotating effect and one red grating effect.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 17-12-2013 RV Revision date + author initials: 18-02-2014 RV
