Check if all the screws are intact and secured and tighten or replace them where needed. Check all metal
parts of the device for any signs of corrosion. If corrosion is found, the device needs to be checked
thoroughly.
Manually-adjustable focus
Depending on the application and distance, the projected beams may not be in focus. For that reason, the
ALO Micro Scan is equipped with a manually adjustable focus that's positioned under the reflective moving
mirror.
Preferably, the focus should be adjusted when the device is turned off, or carefully while the device is
projecting a fixed beam of light and not moving.
Adjust the focus by turning the projection lens clockwise or counter-clockwise. The projected beam will
appear sharper.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:18-02-2017 RV
Revision date and author's initials: -
