The power connectors for the ALO Micro Scan have a power capacity of 10A, subtracted by the maximum
power consumption of the device. With a small safety margin the output on the ALO Micro Scan should be
fed with a maximum of 9 A.
This is more than enough to supply power to multiple devices of the same type via a single power line.
Bear in mind that the installed fuse in the ALO Micro Scan is designed to only protect the device itself. The
power output is not protected.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:18-02-2017 RV
Revision date and author's initials: -
