fixture frequently by using the following check list:
- All screws must be mounted tightly.
- Check all screws and metal parts for corrosion. No visible corrosion should be present.
- The exterior of your fixture must be in optimal condition. Check your fixture for dents, cracks or missing
parts.
- The area in which the device will be used or mounted must be in optimal condition. Check this installation
spot for corrosion, cracks, dents and strength.
- Electrical components (connectors and cables) must be in optimal condition. No form of damage (cuts,
exposed wire cores or any other irregularities) should be visible.
If any visual or mechanical damage is detected, contact your local dealer or a specialised technician. Do not
use a damaged or failing fixture.
Compatibility with wireless DMX
OSO DIS-H wireless DMX-splitters are only compatible with the OSO W-D wireless DMX system. Therefore
this system must first be purchased to be able to use the wireless function of this device.
DIS-H DMX splitters do not work with DMX transmitters from other brands.
The wired operating mode can be used without a DMX transmitter and only requires a physical cable,
connected between the lighting console, controller or interface and the DMX splitter. Ensure that the
operating mode switch is set to wired when using the wired mode.
The information and illustrations shown in this user manual are subject to change without notice.
User manual version: 2.0
Creation date + author initials: 27-01-2016 RV Revision date + author initials: 23-07-2016
