background image

- Always disconnect the device when it is not in use for a longer period or time, when servicing is needed, or 
when the device needs cleaning.
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its socket, 
as this could lead to damage and electric shocks.
- Always operate this device with a stable AC current.
- Always operate this device with the AC ground wire connected to the electrical system's ground.
- Never use other types of cables other than those specified in the manual, do not use defective or 
malfunctioning cables. Contact your dealer if the included or required cables do not work properly with this 
device.
- If the device has been exposed to considerable temperature changes (for example, transport from outdoors
to indoors), do not connect the device immediately. Do not activate the unit until it has reached room 
temperature as moisture might build up inside the unit, which may cause it to short-circuit and/or cause 
electric shocks.

Guidelines and types of use:

- This device is intended to be used by adults for in locations such as community centres, bars, dancing 
schools, roller skating rinks, bowling alleys, theatres etc.
- This device is not suitable for use by children and must always be operated by an adult.
- Only use the device when the environment is suitable and will not cause any damage. Do not use the 
product in damp or dusty environments, or where long-term damage may occur such as: 

- indoor swimming pools where chlorine is used.
- beaches, where sand and salt are present.
- outdoors.
- indoor areas where intense heat sources are present or where the temperature exceeds levels that 

are comfortable for humans.
- Use only the included power cable and only connect the device to a suitable power outlet with the correct 
output voltage. Connecting the device to a power outlet with the wrong type of voltage or using the product 
with a wrong type of power supply may cause permanent damage to the device.
- Avoid shocks and collisions during use and transport. Do not transport the device while in use. Avoid brute 
force during the installation and operation of this device.
- Familiarise yourself with the functions of the device before use. Do not allow operation of the device by 
unskilled or unqualified people.
- Use of the device in ways other than described in this user manual may cause damage and injury. Ayra 
cannot be held responsible for any damage or injury caused by improper use.

Storage and transport:

- This device is intended for mobile use as well as fixed installations. During transport, use the original 
packaging of the product, or a fitting flight case, preferably filled with foam.
- If the device is not used for a longer period of time, disconnect it from its power source and store it in its 
original packaging, or in a fitting flight case.
- Store the device in dry conditions indoors, and do not expose the device to extreme temperature changes.

Housing:

- Inspect the housing of the device frequently. Severe dents, cracks and missing screws should be prevented
at all costs. Do not use the device when the housing is not in optimal condition. Contact your dealer or a 
skilled technician when in doubt about the state of the device.
- Check the fixture and screws for corrosion. Corrosion should not be present on the fixture. Contact your 
dealer or a skilled technician when corrosion is found on the fixture.
- Every power or signal chassis/connector should be mounted tightly. Do not use the device when connectors
are loose.
- Do not use the power adapter if the conductors are visible. The cable can not be replaced by the user and 
should only be repaired or replaced by a skilled technician.
- Prevent the build-up of dust and dirt. Clean the exterior of the fixture every month with a dry or damp cloth. 
If the device is intensively used, the cleaning frequency must be increased. Disconnect the fixture when it is 
going to be serviced.

Fuses:

The main fuse of this product is positioned inside the unit and can not be replaced by the user. As this device
uses only little power, the fuse will only blow when something is really wrong with either the device or the 

The information and illustrations shown in this user manual are subject to change without  notice.

User manual version: 2.0

Creation date + author initials: 27-01-2016 RV Revision date + author initials: 23-07-2016

Содержание 9000-0027-4693














Отзывы: