11. AC power output 110-230V AC, 50/60 Hz (to power other lighting fixtures during use on a stand or in a
truss construction)
12. LED display with menu buttons
13. ComPar Kit fuse (fuse for the ComPar Kit itself)
14. AC power input 110-230V AC, 50/60 Hz (to power the fixture and if connected, other lighting fixtures
15. Power output fuse (fuse for the ComPar Kit power outputs)
16. DMX input with 3P XLR
17. DMX output with 3P XLR
18. Foot connector connector, 5P XLR
19. Built-in microphone for sound activated mode
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 3.0
Creation date + author initials: 30-07-2013 RV Revision date + author initials: 11-02-2014 RV
11
11
12
13
14
15
16
17
18
19
Important notice!
Power inputs & outputs
The ComPar Kit fixtures have independent fuses for the bar itself and the power outputs. They
are directly connected to the AC power input which they share. The internal wiring of the fixture
is built to withstand a load of 16A max. total.
The ComPar Kit fixture electronics are equipped with a F3A 20mm fuse.
The Power outputs are equipped with a F7A 20mm main fuse, which bears the total load for the
power outputs. Every power output is capable of being loaded with 7A max., but the combined
load for both output can not exceed 7A. Doing so will result in blowing the internal fuse. Even
though the bar may withstand a larger load, the 7A fuse is chosen for safety reasons. No
problems will occur when connecting one, two or several LED lighting fixtures. Connecting
fixtures with a high power consumption (such as fog machines) is not recommended by Ayra.
Any load greater than 16A total on the power outputs will also cause the 7A fuse to blow. But in
addition to that, chances are high that the circuit breaker of your power circuit may also cut the
power, causing other fixtures connected to the circuit to deactivate due to the loss of power.
The fuses inside the ComPar Kit act independent of each other. Therefore, any power issues with
connected lighting fixtures that cause the output fuse to blow, will not result in problems for the
bar itself, so it will keep running and prevent total blackout.
Fuses and ratings are identical for the ComPar Kit 1 and 2. This means that it is theoretically
possible to connect a total of 20 ComPar Kit fixtures in a single line, without power problems (As
the maximum power capacity of the power outputs combined is 1610W).
