150-CFP-19T(-)
4
2
Section
Product Safety Precautions
Safety Precautions
CAUTION: SHUT OFF YOUR TOUCH SCREEN BEFORE CLEANING!!
IF YOUR DISPLAY HAS A TOUCH SCREEN PANEL, THE SCREEN WILL BE ACTUATED BY
CLEANING. PRESSING ON THE SCREEN WHILE CLEANING WILL BE SEEN AS A TOUCH
TO THE SYSTEM WHICH COULD CREATE A POTENTIALLY DANGEROUS CONDITION!
•
Do not attempt to service this display yourself. The rear chassis has a seal so that
non-qualified personnel will not expose themselves to dangerous voltages or other
risks.
•
To protect from electrical shock, unplug the display power supply from the wall before
moving.
•
Do not use this display near water.
•
Do not place any heavy objects on the power cords. Damage may cause electrical
shock.
•
Unplug the power supply from the wall or unit if one of the following conditions exists:
o
Power cord or plug is damaged or frayed.
o
Liquid is spilled into the display or the display is exposed to rain or water.
o
The display does not operate normally when the operating instructions are
followed.
o
The display has been dropped or the enclosure has been damaged.
o
The display exhibits a distinct change in performance, indicating a need for service.
•
Ensure that sufficient space is available around the display to provide air circulation for
cooling.
•
Ensure that the ambient air temperature will not exceed the specified maximum
temperature.
•
Do not expose the display to direct sunlight or heat.
Included Parts
Open shipping container and lay all components on a flat clean surface.
Your LCD monitor package will consist of the primary components listed below:
•
LCD Monitor
•
6 ft Video Cable
•
6 ft DC Power Cord (optional)
•
6 ft RS-232 Touch Interface Cable (touch screen units only)
•
6 ft USB Touch Interface Cable (touch screen units only)
•
Documentation and Driver CD ROM
•
Users
Manual
Display
Setup
