Aybey Elektronik UPSLIFT, Руководство пользователя

Страница: 8 / 8

7- TROUBLESHOOTING
Table 7.1 shows some comments about common reported problems.
Table 7.1: Possible Errors and Solutions
NO PROBLEM COMMENTS
1
There is no output voltage
in rescue operation

Check MS (main switch) switch. It must be ON.

Check if the batteries are connected correctly.

Check 5V LED, it should be blinking. If not there may be a
fault in electronic board.

Check 15V LED, it should be ON. If not there may be a fault
in electronic board.

Check the BF (battery fuse). It must be present, not broken.
2
There is no output voltage
in normal operation

Check LUP-NUP terminals. There should be an input voltage
at 220V / 230V AC.
3 Batteries are not charging

Check the BF (battery fuse). It must be present not broken.

Check that the batteries are connected correctly.
4 5V led is always on

Restart system and if led remain same, the electronic board
may have a fault.
5 5V led is always off

Check If MS (main switch) switch is ON.

Check if the batteries are connected correctly.

If all are OK then the electronic board may have a fault.