1-General Description
UPSLIFT is an uninterruptable power supply designed for lift applications. It has been designed
to supply energy to the controller as well as to all peripherals such as doors, brakes, etc. in
case of any power breakdown. It does not supply any energy to the motor. Therefore, in a
system where UPSLIFT is used as emergency power supply then the motor should be fed either
by batteries or by another UPS. UPSLIFT makes use of five 12V dry batteries. It can be used in
all kinds of controllers.
2- Warning and Remarks
Read user manual before starting to install the device.
Do not connect or disconnect any wire from terminals of the device when it has been
energized.
Place the device into the controller box by leaving suggested distances around the
device according to figure 2.1. Otherwise the device may suffer from excessive heat.
Do not store and run the device in water or in excessive cold, hot, moisty and dusty
environments and where chemical gases are present. (see technical specifications)
Do not mount the device to be exposed to direct sunlight.
Figure 2.1: Recommended Mounting Distance [mm]
