AXXIV 15S14, Руководство пользователя, Страница: 48 / 272

1 - 16 System Map: Right & Rear Views
Quick Start Guide
1

Disk Eject Warning
Don’t try to eject a CD/DVD while the system is ac-
cessing it. This may cause the system to “crash”. Stop
the disk first then eject it, or press the stop button
twice.
CD/DVD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to
an unexpected power interruption) you may push the
end of a straightened paper clip into the emergency
eject hole. Do not use a sharpened pencil or any ob-
ject that may break and become lodged in the hole.
Don’t try to remove a floppy disk/CD/DVD while the
system is accessing it. This may cause the system to
“crash”.

Changing DVD Regional Codes
Go to the Control Panel and double-click Device Man-
ager (Hardware and Sound), then click the + next to
DVD/CD-ROM drives. Double-click on the DVD-ROM
device to bring up the Properties dialog box, and se-
lect the DVD Region (tab) to bring up the control pan-
el to allow you to adjust the regional code).
DVD region detection is device dependent, not OS-
dependent. You can select your module’s region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer
(see
“DVD Regional Codes” on page 2 - 5 ).