manualshive.com logo in svg

AXXIOM Manufacturing, Inc. 7031-033, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
AXXIOM Manufacturing, Inc. 7031-033 Скачать руководство пользователя страница 10

 

 

3

1.8. 

PROTECT YOUR HEARING. 

Do Not operate this equipment without wearing OSHA approved hearing protection. Observe all 
applicable local, state and federal safety regulations. See Section 3.9 and refer to OSHA 29 CFR 
1910.95. 

 

 

Loud noise is generated by the blast nozzle and the blowdown operation of this equipment. Wear 
OSHA approved hearing protection. See Section 3.9 and OSHA 29 CFR 1910.95. 

 

1.9. 

PROTECT YOUR PERSON 

 

Abrasive blasting produces dust contaminated with toxic substances from the abrasive used, the 
coating being removed, and the object being blasted. All blast operators and other personnel 
involved in the blast operation or in the vicinity of the blast operation should wear protective 
clothing. The protective clothing should be disposable or washable work clothes that should be 
removed at the worksite so that contaminated dust is not transferred into automobiles or homes. 
See Section 3.9 and OSHA 29 CFR 1910.94 and 1910.134. 

 

1.10.

 

ADHERE TO ALL REGULATIONS. 

Do Not operate this equipment without observing all local, state, and federal safety regulations 
including, but not limited to, OSHA (Occupational Health and Safety Administration). 

 
1.11. STAY 

ALERT. 

Do Not operate this equipment when you are tired or fatigued. Use caution and common sense 
while operating and/or performing maintenance on this equipment. 

 

1.12.  DO NOT USE DRUGS, ALCOHOL, or MEDICATION. 

Do Not operate this equipment while under the influence of drugs, alcohol, or any medication. 
 

1.13.

 

PROTECT BYSTANDERS.

 

Do Not allow blast equipment and related equipment operators and other personnel to enter the 
vicinity of the blast operation without providing respiratory protective equipment that meets 
OSHA regulations. If dust concentration levels exceed the limitations set in OSHA 29 CFR 
1910.1000 then respirators are required. 
 

1.14.  KEEP CHILDREN AND VISITORS AWAY. 

Do Not allow children or other non-operating personnel to contact this equipment or the 
connecting hoses and cords. Keep children and non-operating personnel away from work area. 
 

1.15.  AVOID DANGEROUS ENVIRONMENTS. 

Do Not operate this equipment without familiarizing yourself with the surrounding environment. 
The blast operation and the use of this equipment create high level of noise which will prevent 
the operator from hearing other possible dangers (i.e. traffic or moving equipment). In such 
situations a stand-by watch person may be necessary to prevent injury to personnel. 

 

1.16.  AVOID DANGEROUS ENVIRONMENTS. 

Do Not use this equipment in areas cluttered with debris. Debris in the work area can create 
tripping hazards which can cause the operator to loose balance and result in injury to operating 
personnel. Keep work area clean and well lit. When working at an elevated location, pay 
attention to articles and persons below. 
 

Содержание 7031-033



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды