Installation instructions for HDCC-02
REV
. 7/7/2015 INSTHDCC-02
CAUTION!
Metra recommends disconnecting the negative bat-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
axxessinterfaces.com
•
metraonline.com
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Axxess Integrate
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Retains factory backup camera
• Retains LaneWatch camera
• Retains ability to change factory clock and date
• Retains factory AUX-IN jack
• Can be used in non-amplified, or amplified models
• High level speaker input
• Retains balance and fade
• Micro “B” USB updatable
FEATURES
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
HDCC-02
Honda LaneWatch camera retention
2014-up
• HDCC-02 interface • HDCC-02 harness
INTERFACE COMPONENTS
APPLICATIONS
Honda
Civic
2014-up
CR-V
2015-up
