background image

K

NOWLEDGE IS 

P

OWER

E

nhance your installation and fabrication skills by 

enrolling in the most recognized and respected 
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 
800-354-6782 for more information and take steps 
toward a better tomorrow.

®

Metra recommends MECP 
certified technicians

IMPORTANT
If you are having difficulties with the installation of this product, 

please call our Tech Support line at 1-800-253-TECH. Before doing 

so, look over the instructions a second time, and make sure the 

installation was performed exactly as the instructions are stated. 

Please have the vehicle apart and ready to perform troubleshooting 

steps before calling.

AxxessInterfaces.com 

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION 

REV. 1/23/20 INSTAXDIS-TY1

I N S TA L L AT I O N I N S T R U C T I O N S

AXDIS-TY1

Resetting the AXDIS-TY1
1.

  The 

Blue

 reset button is located inside the interface, between the two connectors. The button is accessible outside the interface, 

no need to open the interface.

2.

  Press and hold the reset button for two seconds, and then let go to reset the interface.

3.

  Refer to “Programming the Interface” from this point.

TROUBLESHOOTING

Содержание AXDIS-TY1









Отзывы: