Axtel AX-300G Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 76

background image

6.

1.
2.
3.

4.

1.

Restart the

AX-300G

, IP Phone will restart and auto-get firmware files from HTTP server.

NOTES:

Axtel

recommends end-user use the

Axtel

HTTP server. For large companies, we recommend to maintain their own TFTP/HTTP/FTP/HTTPS

server for upgrade and provisioning procedures.
Once a "Firmware Server Path" is set, user needs to update the settings and restart the IP Phone. If the configured firmware server is found and
a new code image is available, the

AX-300G

will attempt to retrieve the new image files by downloading them into the

AX-300G

's SDRAM. During

this stage, the

AX-300G

's LEDs will blink fastly until the checking/downloading process is completed. Upon verification of checksum, the new

code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any reason (e.g. TFTP/HTTP/FTP/HTTPS server is not
responding, there are no code image files available for upgrade, or checksum test fails, etc), the

AX-300G

will stop the TFTP/HTTP/FTP/HTTPS

process and simply boot using the existing code image in the flash.
Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if it is performed on a LAN. It is recommended to conduct
firmware upgrade in a controlled LAN environment if possible. For users who do not have a local firmware upgrade server.

Axtel

's latest firmware is available at

Support Document & Firmware.

Oversea users are strongly recommended to download the binary files and upgrade firmware locally in a controlled LAN environment.

To upgrade manually via the Web configuration interface

Click Management Upgrade
Click Management Upgrade
Click Choose file or the blank.

Select the firmware (fw9

20

G.rom )and then click

.

Configuration File

To download configuration file:

Click Management Configuration Configure File

72

«
...
71
72
73
74
75
...
»

Содержание AX-300G













































































Отзывы:

Нет отзывов

Похожие инструкции для AX-300G

Бренд: HAFURY Страницы: 60

Бренд: Aastra Страницы: 19

Clearspan 6757i

Бренд: Aastra Страницы: 2

Бренд: Aastra Страницы: 36

Бренд: Aastra Страницы: 56

Бренд: Aastra Страницы: 80

Бренд: Aastra Страницы: 2

Бренд: Gigaset Страницы: 27

8110 - Pearl - AT&T

Бренд: Blackberry Страницы: 54

Бренд: UMIDIGI Страницы: 40

Бренд: Talkaphone Страницы: 8

Бренд: NEC Страницы: 165

Бренд: NEC Страницы: 101

Бренд: Zte Страницы: 145

Бренд: Splicecom Страницы: 62

Бренд: Zte Страницы: 46

Бренд: NEC Страницы: 67

Бренд: NEC Страницы: 97

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды