Axopar 24 HT 2016, Руководство пользователя

Страница: 13 / 39

2.4 BILGE PUMP SYSTEM
The bilge pump system consists of several different pumps that cover all the lower
sections of the boat. Both electric and manual bilge pumps have been installed. The
output of each automatic bilge pump is 41 litres per minute. The manual bilge pump’s
output is 33 litres per minute. The electric bilge pumps are equipped with a float which
triggers them automatically if there is water in the bilge space. The pumps can also
be controlled from switches on the steering console. The automatic bilge pumps are
equipped with an alarm signal which is activated when the pump starts.
The manual bilge pump is controlled with its handle, which is located in the port side
stowage casing of the afterdeck
Avoid pollution! The purpose of the boat’s bilge pumps systems is to
minimize the risk of accidental discharge of oil polluted water. The boat
owner should check the bilge water regularly for contaminants such as
oil, diesel, glycol etc.
CAUTION!
The pumps must not be run dry for any length of time.
CAUTION!
Check the functionality of the bilge pumps regularly. Remove any waste
from the intakes. The combined capacity of the bilge pump system is
not designed to pump out the boat in the event of hull damage. The
pumps are constantly activated and pump out the boat as required.
The pumps can also be started manually from the boat’s main control
panel.
DANGER!
13
https://www.boat-manuals.com/