background image

12 

6  Status Menu 

Introduction 

The status menu indicates the current status of each item listed 
below. 

 

 

SDI-Input 

This status item indicates if a valid serial digital video signal is 
present at the input.

 SDI-Input

 indicates if an input signal is 

NA

 (not available) or 

Present

 

 

GrpInUse 

GrpInUse

 indicates the audio groups that are already present in 

the incoming SDI signal. The indication of a group, or groups 
being present is as follows, 

___1

__2_

, etc. When no groups 

are present 

 GrpInUse

 indicates 

____

 

 

Audio-Ch_1 

This item indicates the presence of the audio signal selected to 
enter the first analog audio output. This can be any channel from 
1 to 16, depending on the selection made in the settings menu 

Out_1

. Indication is 

NA

Clipped 

or 

Ok

 

 

Audio-Ch_2 

This item indicates the presence of the audio signal selected to 
enter the second analog audio output. This can be any channel 
from 1 to 16, depending on the selection made in the settings 
menu 

Out_2

. Indication is 

NA

Clipped 

or 

Ok

 

 

ANC-stat 

ANC-stat

, Ancillary Status, indicates that embedded audio is 

present and valid. 

ANC-stat

 indicates if an input signal is 

OK

NA

 (not available) or 

Error

 

 

EDH- Stat 

EDH-Stat

, indicates the status of the EDH within the incoming 

SDI signal.

 OK

 is indicated if the status of the detected EDH 

does not indicate errors. 

UES

 is shown if an EDH data block is not present. 

EDA

 is displayed if an EDH error has previously been detected by 

another card in the SDI chain. 

EDH

 is displayed if a previously undetected EDH error is detected 

by this device. 

 

 

FPGA-Stat 

FPGA-Stat

 displays the status of the internal processor of the 

SAM08. The status is indicated as 

Ok

 or 

Error

 

 

Содержание Synapse SAM08






















Отзывы: