Axon Synapse HCS100 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 44

Axon Synapse HCS100 Скачать руководство пользователя страница 17

15

Output1-Clip

With this setting you select which clip should be played back. Can be one
of the 32 possible clips.

Output1-Next

With this setting you select which clip of the 32 possible clips, should be
played back next after the current clip, selected with

Output1-Clip

, is

finished. When the clip set with Output1-Clip is finished, it is updated
automatically with the clip set with Ouput1-Next.

Note:

-

When the clips set with Output1-Clip and Ouptut1-Next differ
from eachother, and Output1-Enable is set to On or Loop,
Output1-Clip will be updated and played with Output1-Next when
the current clip is finished.

-

When the settings Output1-Clip and Output1-Next are the same
and Output1-Enable is

not

set to Loop, the output will stop after

the current clip is finished.

-

When the settings Otput1-Clip and Output1-Next are the same and
Output1-Enable is set to Loop, the current clip will be
continuously played.

Output2-enable

Sets output 2. Can be set to be the same as output1 (Delay1) or output1
without overlay.

Output2-Overlay

The HCS has on screen display which can show different kinds of
information as overlay over video output 2. For the HCS120 you can set a
logo as overlay on output 2.
These are the possible overlays:



HW-status

: showing CPU Environment temp, CPU core temp,

FPGA Environment temp, FPGA Core temp and FPGA fan speed.



Disk-Status

: showing overall SSD status (tested mean the

disk is tested Axon approved, untested means the disk is not tested
and thus not approved by Axon), SSD model, SSD serial number,
SSD size (in GB), Average reading bitrate and average writing
bitrate.



Logo-InserterA:

Overlay the logo(s) which is set with the

Logo-inserterA settings (HCS120 only).



Off

: Disables the overlay function.

Num-Clips

Sets the number of clips you want to record. Disk space is divided equally
by this number so that each clip can have the same maximum length. Can
be set to 1, 2, 4, 8, 16 or 32. Default is 32.

Note:

Can only be changed when

Disk-Protect

is set to

Off

.

Changing this setting will result in erasing the disks!

«
...
15
16
17
18
19
...
»

Содержание Synapse HCS100













































Отзывы:

Нет отзывов