24
Audio_Ctrl
This controls the selection of the currently active
Audio_Preset
.
Before using the audio presets, you need to select all audio sources and
channels in each preset. To ease this process you can use the
Emb-
Prst-Default
setting to reset all audio presets to factory default
selections.
When
Follow
is chosen, the
Audio_Preset
follows the backup
switch position automatically. It chooses preset A when channel A is
output on the main channel A, or Preset B when preset B is output on the
main channel A. This is the default setting.
When set to
Inv-Video
,
Audio_Preset
follows the backup switch
position automatically, but selects the presets with inversion. So, Preset
B when channel A is output on the main channel A, or Preset A when
preset B is output on the main channel A.
When
A
,
B
or
C
are selected, the audio preset is selected manually,
regardless of the bypass switch position.
For versions before 0709, when
GPI
is chosen, GPI In 2 (pin 7) selects
either preset A (contact open) or B (contact closed).
For versions from 0709 onwards, when
GPI-B
pool is chosen, the
GPI_B status value 0 selects audio preset A, value 1 selects B and 2
selects audio preset C.
Audio_Preset
Here you can select which of the 3 selectable audio presets you want to
edit. Changing this will not change the active preset, unless the currently
active preset is the same you are going to edit. All following audio
settings that are preceded with a ‘
#
’-prefix are part of the preset.
#Audio_Delay
With this item you can delay all de-embedded audio on input channels A
and B between -10000ms and 10000ms with 1ms increments. . Default
is 0ms. This item is part of the audio presets.
EMBEDDER
These settings are only available in the GIX110 and HIX110
Emb_Prst_Default
Emb-Prst-Default
sets all embedding presets to a factory default.
Using this setting is a quick way to set up embedding.
Setting this to
On
performs a reset on embedder presets A,B and C, and
will return to the
Off
position automatically after use. Preset A will use
the channel A de-embedded audio (SDI1) as source. Preset B will use
the channel B de-embedded audio (SDI2) as source. Preset C will use
the AddOn channels 1 to 16 as source.
