25
#Emb-Mode
With
Emb-Mode
you select how the audio should be embedded into the
video:
overwrite
the exsisting audio, or
Append
. Default is
overwrite
.
#EmbA_Grp ~
#EmbB_Grp
With these settings you select into which audio group (= 4 audio
channels) of the outputs you want to embed the corresponding 4
forwarded audio channels, coming from the de-embedder or add-on bus.
Can be
group1
,
group2
,
group3
or
group4
. You can also choose
to not use these 4 audio channels for anything by setting this item to
off
.
#SourceEmb-A1 ~
#SourceEmb-D4
With these settings you can select where the corresponding audio
channels of the embedder outputs are coming from. Choices are:
■
SDI1
: source is the de-embedder on the input of channel A, after 4
to 1 pre-selection mux A.
■
SDI2
: source is the de-embedder on the input of channel B, after 4
to 1 pre-selection mux B.
■
Addon01/16
: Source is the first 16 channels of the add-on bus
■
Addon17/32
: Source is channels 17 till 32 of the Quad Speed add-
on bus. This will not be available when working in normal add-on
bus mode.
#EmbA1_Inp_Ch ~
#EmbD4_Inp_Ch
With these settings you can select which Channel of the selected source
should be embedded to the corresponding output channel. Can be any
channel between
Ch_1
and
Ch_16
.
Fade-Time
(110 only)
With
Fade-Time
you set the amount of time needed to fade out to the
lowest gain for the V fade and it delays the actual switch frame for the
backupswitch! You will have to manually add
Switch_Delay
amount
of frames to the video delay of the card to maintain AV synchronisation.
GPI pool modes
Contact _1 ~ Contact_7
In this card it is possible to make the 7 available GPI contacts part of a
GPI pool that can control the various functions in the card separately (all
Xx_Ctrl
items of the menu). With these item you can select which
pool the corresponding GPI is part of. You can also choose to not use the
corresponding GPI at all by setting it to
Off
. Possible settings are:
GPI A
: part of GPI-A pool, can be triggered using Take A.
GPI B
: part of GPI-B pool, can be triggered using Take B.
GPI C
: part of GPI-C pool, can be triggered using Take C.
GPI D
: part of GPI-D pool, can be triggered using Take D.
Please refer to ‘Appendix 2: GPI’s explained’ for a more elaborate
explanation of the GPI settings and status items.
