27
R-BlackA
R-BlackA
controls the Red-Black of channel A. The control range
is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
G-BlackA
G-BlackA
controls the Green-Black of channel A. The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
B-BlackA
B-BlackA
controls the Blue-Black of channel A. The control
range is between –128bits and 127 bits in steps of 1 bit
The default setting is 0 bit.
CVBS-Hue
This item adjusts the HUE of the CVBS input. Can be set between -
90 and +90 degrees. Default is 0 degrees.
AUDIO PROC AMP
Audio-Bus-IO
This setting can change the Audio bus order from the normal
1234
(=default) to
1324
. The 1324 order is of use to route the 1
st
group
of audio from the 2
nd
input to the 2
nd
channel of a slave card.
Audio_Ctrl
With this setting you select how the audio presets should be
controlled. Can be either Manually (
Manual
), via GPI-triggers
(
GPI
,
GPI-A
,
GPI-B
or
GPI-C
), via the SD aspect ratio (
SD-AR
)
or via the HD aspect ratio (
S2016
).
Audio_Prst_act
With this item you can manually change the currently active audio
preset. Can be any preset between 1 and 16. By default it is set to 1.
All menu settings that are preceded with a ‘
#Emb
’-prefix are part of
the preset.
Audio_Prst_Edit
Here you can select which of the 16 selectable audio presets you
want to edit. Changing this will not change the active preset, unless
the currently active preset is the same you are going to edit. All
menu settings that are preceded with a ‘
#Emb
’-prefix are part of the
preset.
#Audio-Dly-sInp1
(GDS/HDS110 only)
With this item you can delay all audio on input 1 between -10000ms
and 10000ms with 0.01ms increments, allowing for precise control
(2 sample accuracy in practice). Default is 0ms. This item is part of
the audio presets. This audio delay is calculated on top of the
tracked video delay.
