Axminster ED16B2, Руководство пользователя

Страница: 23 / 32

Removing the Chuck Assembly
23
Lower the quill to it’s maximum depth by turning
the feed lever handle. while holding the handle turn
the depth scale ring (A) fully round and then tighten
the butterfly depth stop knob (B) to lock the quill in
position, (See fig 39)
Place a piece of timber on the drill table to prevent
the chuck from being damaged and lower the quill to
it’s maximum depth by turning the feed lever handle.
Fig 39
Pillar Drill (ED16SB) Only
Pillar Drill (ED16B2-ED16F2)
Fig 40
Preparation
Removing the chuck
Morse taper arbor
Quill slot
Fig 41
You wil require the morse taper drift (12)
A
B
While holding the handle in place turn the chuck
to line up the morse taper arbor (11) in the quills
machined slot, (See fig 40). Insert the morse taper
drift (12) in the quills slot, thus pushing the morse
taper down and releasing the chuck, (See fig 41).
Morse taper drift
11
12