Axminster BTP210F, Руководство пользователя

Страница: 9 / 32

W H I T E
A X M I N S T E R
W
08
Additional Safety Rules for Planer Thicknessers...
FREEPHONE
0800 371822
• Keep the feed rollers free of wood chips and sawdust. If the movement becomes clogged,
kickback can occur.
• To ensure safe operation, inspect the feed speed spindles whenever you think it's necessary.
• The machine is designed for the planing of wood only. Never to cut recesses, tenons or
moulds.
• Do not use the machine for planing wood with numerous knots or loose knots.
• Do not stand directly in front of the machine during operation, stand to one side.
• Check that the blades are fitted correctly before commencing operation.
• Take care when handling blades and the cutter head. Wear work gloves. The blades are sharp
and can easily cut bare hands.
• Allow the machine to reach full speed before feeding in a workpiece.
• Check that the cutters are securely fastened.
• Check the amount of cut on the blade before feeding in a workpiece.
• Check that the cutters are securely fastened.
• Check the amount of cut on the blade before using the machine.
• Never attempt a heavy cut in short stock.
• Avoid cutting across the grain.
• Missing push-stick may lead to hazards. Use the push stick or push pads that keep your hand
well away from the blades, particularly for shorter stick planing. Do not attempt to feed
workpieces that are shorter than the minimum length specified in the technical data of the tool.
Put the push stick back to the hooks on the side housing when not in use.
• Advance the material to the cutting head for normal operation by sliding it along the table,
never by placing it directly on the cutting head.
• Never leave the machine set to a heavy cut, but reduce it to a minimum cut.
• Use cutting blades designed for this machine only.
• Rectify the faults including guards and cutter block immediately as soon as they are
discovered.