Axminster BTP210F, Руководство пользователя

Страница: 17 / 32

W H I T E
A X M I N S T E R
W
16
Operating Instructions...
FREEPHONE
0800 371822
• Insert the mains plug into its socket, then open the NVR switch cover and press the green
button to switch on the machine. Wait until the cutterblock reaches full speed, place the
workpiece onto the infeed adjustable table(10). Use both hands push the workpiece forward
over the cutterblock using the two push blocks (D). Feed the workpiece in the direction as
shown by the arrow, which is labeled on the left side of the table. (See fig 16)
• To turn off machine when completed, by pushing the red button and close the yellow cover
and wait until the machine comes to a complete stop.
• Remove chips and splinters from the cutterblock, fixed and adjustable tables.
• Push back the cutterblock guard (9) back in position, to cover the cutterblock.
Note: Remove the dust extraction system, if you intend to use the thicknessing table.
DISCONNECT THE PLANER THICKNESSER FROM THE MAINS SUPPLY
!
4
15a
Fig 14
Fig 15
Fig 16
Direction arrow
Push blocks (D)
Workpiece