Axminster BDS-612, Руководство пользователя

Страница: 9 / 28

Assembly
9
Warning: We advise you seek
help when lifting the sander!
Fig 05
Fig 06-07
Step 5 Lineup the short brackets (W) with the holes in the
legs (U) and the slotted holes in the brackets (V), lightly
secure with the coach bolt and nuts as before (see figs
06-07).
Step 6 Locate the four rubber feet (R), place a foot to the
end of one the legs (U), lineup the slotted groove in the
foot, using a high faced mallet lightly tap in place, see fig 08.
Repeat for the remaining feet.
Fig 08
Step 7 With help, lift the sander and place upright on the
floor. (See figs 09 -10) Now go round and tighten all the nuts
using a 13mm spanner. Replace the lift and shift handle you
removed earlier.
Continues Over...
Fig 09-10
V
W
R