Axminster BDS-612, Руководство пользователя

Страница: 12 / 28

Assembly
Fig 23
Step 6 Locate the idler roller guard cover (E), lower the
guard over the roller and line up the holes with the holes in
the linisher guard cover (D) secure using the remaining M6
screws (M) and the M6 larger star knob, see figs 24-25.
Fig 24-25
Step 7 Locate the linisher’s small table (G) and the remaining
M6 Hex screws (L). Offer up the two pre-drilled holes with the
thread holes in the linisher mounting plate and secure with
the two M6 screws (L) (see fig 26).
Step 8 Locate the cast iron table (F)and the M8x30mm bolt
and washer (J), slot the machined hole in the table’s bracket
over the pin to the side of the linisher and push home, see
figs 27-28. Place the M8 washer over the bolt (J), introduce
N O
M
O
Fig 26
Fig 27-28
Fig 29
the bolt through the machined slot in the tables bracket and
into the threaded hole in the linisher, tighten with a 13mm
spanner (see fig 29).
Step 9 Locate the mitre fence (B) and slide it into the tables
‘T’ slot from the right side (See fig 30).
Fig 30
12
Pin