manualshive.com logo in svg

Axminster Trade AT508WL, Руководство пользователя

Поделиться
Скачать
Axminster Trade AT508WL Скачать руководство пользователя страница 19

Operating Instructions

19

DISCONNECT THE LATHE FROM THE 
MAINS SUPPLY BEFORE CHANGING 
THE BELT!

Removing the Drive Centre

To remove the drive centre from the spindle, locate the push 
rod (E), insert it through the index ring assembly and push the 
drive centre out, see fig 58.

Fig 58

E

Drive centre

Changing the Belt Speed

NOTE: THE LOWEST SPEED PULLEY COMBINATION 
IS FURTHEST FROM THE FACEPLATE. THE  SMALLEST 
MOTOR PULLEY DAMETER TO LARGEST SPINDLE 
PULLEY DIAMETER, SEE CHART ON THE HEADSTOCK

1. Open up the pulley access panel on top of the headstock
by removing the Hex screw, see fig 59-60. Slacken the belt by
loosening the motor locking handle (a), move the motor
until the belt is slack enough to be reposition, see fig 61-62.

Fig 59-60

Fig 61-62

a

Motor handle

2. Reposition the belt, making sure the groves in the belt slot 
into the groves in the pulleys. Pull/push the motor assembly
until the belt is under tension, retighten the motor locking 
handle (a), see fig 63-64.

Fig 63-64

Push the motor back and tighten 
locking handle

Содержание AT508WL

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды