Axminster Trade AT170E, Оригинальное руководство пользователя

Страница: 14 / 32

14
Assembly
14
Fig 32
7. Hook the bag onto the steel hooks around the extractor
housing to temporary hold the bag in place, see fig 33.
8. Locate the retaining belt, rap the belt around the bag making
sure the belt is positioned on top foam seal band then latch it
down to hold and to seal the bag against the extractor, see fig
34-35.
Fig 33-34-35
Shaker Paddle Operating Handle
1. Locate the shaker paddle (9-23), insert the handle mounting
over the paddle drive shaft making sure the clamping bolt is
positioned over the machined face then tighten the bolt using
the supplied spanner to secure the handle, see fig 36-37-38.
Fig 36-37-38
Inlet Manifold (AT60EB Extractor Only)
Locate the inlet manifold (18) and the small Phillips screw (27h).
Insert the manifold over the extractors inlet and line up the
threaded hole in the inlet with cutout slot in the manifold, see
fig 39. Secure the manifold in place with the Phillips screw, see
fig 40.
Fig 39-40
5
19
Fig 31
Bag hook
9
23
18
27h