Setup/Adjustments
9
WARNING! KEEP TOOLS AND
EQUIPMENT OUT OF THE REACH
OF YOUNG CHILDREN!
CLEAR ALL TOOLS AWAY FROM
SANDING AREA!
Securing the Sander
It is recommended to secure the sander to a work bench or
stand using the four pre-drilled holes (d) in the chassis, (see
fig 07).
Fig 07
d
Operating Instructions
CONNECT THE SANDER TO THE
MAINS AND SWITCH ON.
Step 6 Check the pointer is set to ZERO on the tables scale
and adjust until correct (see fig 6).
Fig 06
Pointer
Scale
Sanding Configurations
Don’t press too heavily against the sanding surface, all this
will do is slow the sander down. Remember, sanders work
by removing small particles of material quickly and heavy
pressure works adversely to the cutting process, further, it
will accelerate the rate of ‘clogging’ of the abrasive surfaces,
rendering the machine less efficient.
Fig 08
Fig 09
Disc Sanding
Bevel Sanding
WARNING! WEAR EYE
AND EAR PROTECTION!
WARNING! WEAR A DUST MASK!
Содержание 501210
