Axminster Craft AC216TS, Оригинальное руководство пользователя

Страница: 8 / 40

Specification
8
Code 104926
Model AC216TS
Rating Craft
Power
1.1 kW 50Hz 230V 1ph
Blade Dia/Bore 216 mm / 30 mm
Blade Tilt 0° to 45°
Max Depth of Cut @ 45˚ 45 mm
Max Depth of Cut @ 90˚ 65 mm
Max Width of Cut with Fence 370 mm
Table Size 570 mm x 400 mm
Table Height 320 mm (bench mounted)
Table Size With Extensions 570 mm x 675 mm
Dust Extraction Outlet 100 mm and 63 mm
Min Extraction Airflow Required 850 m³/hr
Overall L x W x H 670 mm x 695 mm x 420 mm
Weight 70 kg
Code 106803
Model AC254TS
Rating Craft
Power
1.5 kW 50Hz 230V 1ph
Blade Dia/Bore 254 mm / 30 mm
Blade Tilt 0° to 45°
Max Depth of Cut @ 45˚ 56 mm
Max Depth of Cut @ 90˚ 80 mm
Max Width of Cut with Fence 430 mm
Table Size 485 mm x 680 mm
Table Height 375 mm (bench mounted)
Table Size With Extensions 760 mm x 900 mm
Dust Extraction Outlet 100 mm and 63 mm
Min Extraction Airflow Required 1,000 m³/hr
Bench Mounted 1,070 x 800 x 645 mm
Stand/Cabinet Mounted 1,070 x 800 x 1,170 mm
Weight 89 kg
Assembly
104926 Basic Saw
WARNING! THE SAW IS HEAVY SEEK
ASSISTANCE BEFORE LIFTING.
1. With assistance lift the saw assembly (A) from the box onto
a suitable work surface. Locate the two operating wheel knobs
(D) and attach one to each operating wheel, see fig 01-02.
Fig 01-02
D
Fig 03-04-05
2. Undo and remove the screws,washers & nuts to separate
the two parts of the dust extraction moulding (J). Position the
inner mounting plate over the machine cut out for the
extraction outlet. Repeat for the outer moulding, line up the
holes and replace the screws to secure the assembly (J) in
position, see fig 03-04-05.
Inner plate
J
NOTE: If either sand or cabinet has been purchased,
assemble them first, see page 12-13.Then attach it to
the saw before moving the saw and standing it upright.