Axkid One, Инструкция по эксплуатации

Страница: 18 / 130

18
Removing Axkid One car seat
from your vehicle
• Push the support-leg button (I) and collapse the support-leg (R) to its shortest position.
• Slide the front brace release button (C) and fold the front brace (D) towards the seat to release the tension against the
vehicle seat.
• Disconnect the ISOFIX connectors (Y) by pushing down on the ISOFIX buttons (X) and then slide them backwards,
away from the vehicle seat.
• Keep holding the front brace (D) with one hand and grab the back handle (O) with the other hand and lift Axkid One
car seat out of your vehicle.
• Fold up the support-leg (R) by pulling the support-leg release strap (Q) and folding the support-leg (R) upwards.
Care and maintenance
• The seat textile cover can be machine washed at 30º C on a gentle cycle. Do not put the cover in a dryer as this can
damage the cover and the padding may separate from the fabric. Visit www.axkid.com to find videos explaining how
to remove and attach the cover.
• To remove the textile cover from the seat, pull outwards on the side cover (L) and de-attach the Velcro. Open the
zippers at the backrest and gently remove the cover from the seat. Make note how it is attached around the seat to
make it easier to put back. When reinstalling the side cover (L), insert it under the aluminum frame and simply push
back into the snap attachment. To remove the headrest cover, open the zippers on the bottom of the headrest and
gently remove the cover.
• If the seat cover needs replacing, ensure only original products from Axkid are used. If other products are used, Axkid
One car seat’s safety system may be compromised and could lead to severe injury in case of an accident.
• Any plastic parts of Axkid One car seat can be cleaned with mild detergent and water. Do not use aggressive
chemicals containing solvents or similar, as this can cause damage to the plastic and compromise the safety of the
car seat.
• All materials used in Axkid One car seat are recyclable and should be recycled as per your local legislation. Ask your
local recycling center for advice when recycling this product.
• The sound indicator (S) contains a replaceable CR1632 battery. Please remove and recycle the battery according to
your local legislation when the Axkid One car seat should no longer be used. Unscrew the two screws at the bottom
of the support-leg (R) and remove the cover to gain access to the battery.
• Do not make any modifications or alterations to Axkid One car seat other than those described in this instruction manual.
• Any repairs must be carried out by the manufacturer or agent.