Axkid One, Инструкция по эксплуатации

Страница: 10 / 130

10
Thank you for choosing Axkid One
Read this instruction manual before installing Axkid One car seat in your vehicle.
For more information and installation videos visit www.axkid.com.
Axkid One car seat is a rear-facing car seat approved for children
with a height between 61-125 cm or with a maximum weight of 23 kg.
Axkid One + car seat is a rear-facing car seat approved for children
with a height between 40-125 cm or with a maximum weight of 23 kg.
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use in, i-Size
compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle user’s manual. If in doubt,
consult either the Enhanced Child Restraint System manufacturer (www.axkid.com) or the retailer.
Important information
To maximize your child’s safety, it is important that you keep following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously affect the safety for your child.
If in doubt, contact your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use Axkid One car seat in a seating position where an active frontal airbag is fitted. If you still wish to install
Axkid One car seat in this location the airbag must be switched off according to the vehicle manufacturers instructions.
• Should you have an accident, no matter how small, your car seat should always be replaced. It may have damage that
is nonvisual and could seriously affect the safety of your child. For this reason, Axkid does not recommend purchasing
secondhand car seats.
• If Axkid One car seat has been exposed to direct sunlight, make sure the car seat is not too hot before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event
of an accident.
• Ensure that Axkid One car seat is installed in a way where no parts become trapped by movable seats, car doors, etc.
• Axkid One car seat may only be installed rear-facing.
• Always make sure that the harness is adjusted to correctly fit your child’s body. The harness is adjusted by moving the
head support.
• Make sure that the child’s back is pushed against the car seat when restraining your child with the harness.
• Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked, you
should not be able to pinch the straps.
• Make sure there is no twist in the harness.
• Always make sure the support-leg is in its correct position and have contact with the vehicle floor. Check that the indicator
on top of the support-leg is green and that you don’t hear any beeping sound from the support-leg foot.
• Do not attempt to disassemble nor modify any part of Axkid One car seat. The warranty and the safety performance of
Axkid One car seat could be affected if doing so.
• Never use Axkid One car seat without the seat textile cover. The seat textile cover is a safety feature and may only be
replaced with an Axkid original seat textile cover.
• Read the vehicle handbook to find which seating positions is suitable for this seat.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If any doubts, contact the retailer where the car seat was purchased or contact info@axkid.com