Axkid Dallas, Инструкция по эксплуатации

Страница: 9 / 25

3
EN
Read this instruction manual before installing the Dallas child restraint in your
vehicle.
Thank you for choosing an Axkid child seat. Our team has over 30 years combined
experience within child safety, and we have done our utmost to make the Dallas child
seat as safe as possible. The Dallas child restraint is approved according to ECE
R44/04, the latest European standards for child safety. To maximise your child’s safety
it is important that you keep the following in mind;
Important Information
Dallas
Instruction Manual
Forward-facing 15-36 kg
Read this instruction manual carefully before installing the Dallas child restraint.
If in doubt, contact your retailer who can demonstrate a correct installation. An
incorrect installation could endanger your child.
The seat is ONLY to be used forward facing and for children weighing between
15 and 36kg.
The child car seat must only be used in vehicles which are fitted with a three
point seat belt system that has been approved by regulation ECE-16 or similar.
Do not use a child restraint in a seating position where an active airbag is fitted. If
you still wish to install the Dallas in this location the airbag must be disconnected
at an authorised service centre. Some vehicles may be equipped with a switch
which allows you to manually switch the airbag off. It is important to always
check if the vehicle’s indicator light shows that the airbag is turned off.
DO NOT use anything such as a cushion or coat to raise the Dallas off the
passenger seat. In the event of an accident, the Dallas and the vehicle seat belts
will not be able to protect your child as well as they should.
Never leave your child unattended in the car.
All passengers must be secured in their seats using a safety belt.
V1