5
PREFACE
-
Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including other amplifiers) that produce heat.
9. Use the apparatus only in Moderate climates.(not in tropical climates)
10. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other, a grounding type plug has two blades and a third
grounding prong, the wide blade or the third grounding prong are provided for your safety. If the
provided plug does not fit onto your outlet, consult an electrician for replacement of the obsolete
outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
12. Only use attachments / accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there
is adequate ventilation. Leave 20cm (8”) of free space at the top and sides and 10cm (4”) at the
rear. The rear edge of the shelf or board above the apparatus shall be set 10cm (4”) away from
the rear panel or wall, creating a flue like gap for warm air to escape. Good airflow is necessary
to help ensure proper operation. Not only should you provide enough free space around the unit,
but also ensure that air can flow freely and escape from the amplifier surroundings. Failure to do
so may cause thermal shutdown of the unit, and reduced life expectancy.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the apparatus.
•
If the apparatus has been exposed to rain or water.
•
If the apparatus has been dropped or damaged in any way.
•
If the apparatus does not operate normally by following the instructions. Adjust only those
controls that are covered by the operating instructions.
•
When the apparatus exhibits distinct change in performance this indicates a need for a
service.
WARNING!
Do not expose the apparatus to dripping or splashing.
Do not place objects filled with liquids near the apparatus.
WARNING!
To reduce the risk of fire or electric shock,
Do not expose this apparatus to rain or moisture.
WARNING!
Equipment must be connected to a Mains socket outlet with a protective earthing
connection.
WARNING!
Never push objects of any kind into the apparatus through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
IMPORTANT!
Ensure adequate ventilation. Do not install in a cabinet that is smaller than
60cm (24”) wide x 45cm (18”) deep x 20cm (8”) high. If you do the device may overheat.
