Axis T92A10, Руководство по установке

Страница: 5 / 19

AXIS T92A10 Installation Guide Page 5
ENG
LISH
Install the bracket
Install the mount for AXIS T92A10 on a wall ceiling or pole and make sure the screws and plugs are
appropriate for the material (wood, metal, sheet rock, stone). Install the wall bracket as explained
below.
1. Install the wall bracket/holder on a wall,
ceiling or pole using screws appropriate for
the weight of the housing and the material.
2. Attach the rubber gasket and make holes for
the cables.
3. Pull a sufficient length of the cables
through for the housing and camera
(approximately 50cm, or 20 inches).
4. Proceed to “Install the camera in the
housing” on page 6.
2
cables
cables
A - Wall bracket (internal cable channel)
rubber gasket