AXIS Q6055-E PTZ Dome Network Camera
Setup
How to record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibration or shock. Vibration caused by the environment or an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera during after hours and you would like to receive a video clip of the event.
1. Go to
Settings > System
>
Detectors
.
2. Enable shock detection and set shock sensitivity value.
3. Click
Save
.
Create an action rule:
4. Go to
Settings > System > Events
and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select
Detectors
and then select
Shock detection
.
7. From the list of schedules, select
After Hours
.
8. From the list of actions, select
Send Video Clip
.
9. Select an existing stream profile or create a new one.
10. Set the pre-trigger time to 5 seconds.
11. Set the post-trigger time to 60 seconds.
12. Select an existing recipient or create a new one.
13. Click
Ok
.
Applications
About applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to
axis.com/applications
To find the user manuals for Axis applications, go to
axis.com
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
11
