AXIS Q6045–S PTZ Dome Network Camera
Accessing the Product
Pan and Tilt bars
– Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the
camera view to that position.
Zoom bar
– Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
Focus bar
– Use the arrows to focus the camera, or click on a position on the bar to set the focus position. Using the
focus bar will disable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clicking
the
Ctrl panel
button (see above).
Iris bar
– Click on a position on the iris bar to change the degree to which the iris is opened. This will disable the
product’s auto iris. To re-enable, use the PTZ control panel which is opened by clicking the
Ctrl panel
button (see above).
Brightness bar
– Click on a position on the brightness bar to adjust the image brightness. This setting will not be saved.
To make a saved change, go to
Setup > Video > Camera Settings > Brightness
and adjust the brightness.
The PTZ controls can be disabled under
PTZ > Advanced > Controls
, see
Controls, on page 33
.
15
